Exadata Install Process Got Much Simpler With Elastic Configuration

Recently I had performed an Exadata X-6 Bear Metal install and I thought it will be a good idea to share my experience with all of you. Exadata deployment is itself a mini project. You need to work with database /network  team to run OEDA configuration tool to generate all the configuration files. But for this blog, I will focus on the install part only. Before you can this proceed with Exadata Install process, you need to make sure you have run the check-IP script to verify all the DNS entries and IP addresses. It’s very important that you don’t start with install process without verify network configuration.

At this point you should have all the configuration and software files ready on a USB drive or on your laptop. Now you can use following steps to compete Exadata install.

Step 1: You can use Ethernet port 48 to connect to Exadata network. Mostly likely, there is going to blue Ethernet cable you can use for this step. Modify your local area network settings as per following configuration.

Capture 1

Step 2: Connection to Exadata node8 ( using ssh and run ibhosts. You should see all the nodes with their addresses and elasticNode keyword with all nodes.

Capture 2

Step 3: cd into /opt/oracle.supporTools and run reclaimdisks.sh –free –reclaim on node 8 ( and node 10 (

Capture 4

Step 4: run reclaim disk check on both nodes. (reclaimdisks.sh –check) and make sure you get the following output.

Capture 5

Node: – Please make sure you run step 3, 4 on all Compute nodes (node8, node10).

Step 5: Plugin the USB and mount it using following procedure. This step is optional, if you are planning to copy software through ssh.

for x in `ls -1 /sys/block`; do udevadm info –attribute-walk 

–path=/sys/block/$x | grep \

 -iq ‘DRIVERS==”usb-storage”‘; if [ $? -eq 0 ] ; then echo /dev/${x}1; \

fi ; done

Capture 6

Step 6: Unzip OEDA tool to /opt/oracle.SupportTools/onecommand directory , then copy all the configuration files to /opt/oracle.SupportTools/onecommand/linux-x64.

Capture 11

Step 7 : Copy /opt/oracle.SupportTools/onecommand/ to node10 ( 2nd dbnode or all compute nodes )

Capture 19

Step 8: Apply Elastic configuration from node8. This is a very important step, you only need to run this step from 1 node only. This step will use your Exadata configuration file to assign new IP addresses and reboot all exadata nodes including storage nodes.

  • cd /opt/oracle.SupportTools/onecommand/linux-x64
  • ./applyElasticConfig.sh -cf customer_name-configFile.xml

Capture 12

Step 9: Connect to Exadata using new IP address. It’s important to understand that your machine has new ip addresses now. Change your local area settings and assign same IP/MASK as your PDU01 . You can find this information in your OEDA installation template.

Capture 13

Step 10: Connect through ssh and run ibhosts to see if new ip addresses has been assign. Its important that you don’t see any elasticNode keyword on the screen, otherwise your elastic configuration is not completed.

Capture 14

Step 11: Move onecommand directory under /u01 on both dbnodes.

Capture 15

Step 12: Copy all the required software and patches to (/u01/onecommand/linux-x64/WorkDir). You only have to do this on node1. Again you can find complete list of software in your Exadata installation template.

Capture 21

Step 13: Run check-IP script one more time to validate all the network settings.

/opt/oracle.SupportTools/onecommand/linux-x64/checkip.sh -cf customer_name-configFile.xml

Step 14: If you don’t get any error during check-IP process, you can proceed with Exadata install. At this point, there are 19 steps to complete Exadata software install. You can go thought with them 1 by 1 or you can run all of them together. I will strongly recommend doing it 1 by 1, it will help you troubleshoot any issue during the install process. You can using following command to list all the steps.

  • ./install.sh -cf customer_name-configFile.xml -l

Capture 16

Step 15: You can start going through each steps 1 by 1 using following command. I will only post screen shots for step 1, 19

(Step 1 Screen Shot)

Capture 17

(Step 19 Screen Shot)

Capture 19b

Final Step: Please login to all nodes (Compute & Storage) and change the root password.

Capture 20